Are you looking for an alloy wheel to suit your Peugeot Boxer Motorhome?
Looking for the wheel to suit your particular Peugeot Boxer, please select from the list below:
Peugeot Boxer 5x118 PCD Centre Bore 71.1
Select Me 15" Peugeot Boxer 1998-2006 Alloy wheels
Select Me 15" Peugeot Boxer 2007-2016 Alloy wheels
Peugeot Boxer Maxi 5x130 PCD Centre Bore 78.1
Select Me 16" Peugeot Boxer Maxi 1998-2006 Alloy wheels
Select Me 16" Peugeot Boxer Maxi 2007-2016 Alloy wheels
To talk about your options, please give us a call on 01482 505526
Peugeot Boxer Motorhome Wheels
It is very common for motorhome owners to fit alloy wheels to their vehicles, but which ones to go for? Are they safe? How do I know that they will fit? These questions and more are answered in this blog post.
Campers which are based on a Peugeot Boxer chassis will be one to two variations; either a standard Peugeot Boxer or a Peugeot Boxer Maxi. Just to complicate things, if the vehicle is a maxi it may not say this on the van – not very helpful I know! If you are looking to buy alloys for your van then you will need to determine which type you have. The easiest way to do this is to check your current tyre size, this will read something like 215/70R15. The 15 in this size refers to your wheel size, so in this example, the van would be running on 15″ wheels. If your vehicle is on 15″ wheels then it will be a standard Peugeot Boxer, if it’s on 16″ (and hasn’t been changed onto this size) then it will be a Maxi. If your van has 6 wheels then this is also an indication that the vehicle is a Peugeot Boxer Maxi.
The distinction is important as Peugeot Boxers have different spacing’s between the stud holes on the 2 types. This spacing can be referred to as stud pattern or PCD, if you start looking into wheel specs then you may see these terms. Just for the record, the stud pattern for a standard Peugeot Boxer has a PCD of 5×118, whereas the Maxi is 5×130. Also, the width of the hub where the wheel sits varies (Peugeot Boxer 71.1mm, Peugeot Boxer Maxi 78.1mm) therefore wheels are definitely not interchangeable between variants.
What to look for when buying your wheels
I’ll start with talking about the standard Boxer many motorhome wheels are sold for these as vans do not always come with alloys as standard and original Peugeot wheels are rather expensive. Owners, therefore, start looking at aftermarket wheel choices, but which to go for?
With a heavy vehicle such as a camper, I feel that you should really focus on quality, strength and safety! You need something that is commercially rated to carry the weight, most stockists should be able to provide the wheels load rating, if you multiply this value by 4 then you need the figure to be more than your vehicles fully loaded weight.
Look for Quality
How do you know what the quality is like when buying online? Check where the wheels are produced, there are various products shipped in from China and the Far East which are of dubious quality. There are a handful of European manufacturers which are a much safer bet. Most of mainland Europe uses a system of TUV approval, which is like a testing centre for aftermarket automotive parts. If a wheel is TUV approved then it has been tested to ensure that it is suitable for the vehicle stated, they carry out a bunch of tests to verify the load rating also. Unfortunately, we do not have such an approval system in place in the UK but many insurance companies are familiar with TUV certification. Therefore if you choose to inform your insurance company that you have fitted alloys then the fact that your chosen wheel is TUV approved should mean that they have no issues with such a modification.
"All Tyremen's wheels are TUV approved
Finally look for guarantee length, as standard wheel manufacturers only offer a 1-year guarantee on the paint finish of their wheels. Some European companies offer a longer length warranty which is certainly an indication of the paint quality.
Most vehicle owners opt to stick to a 15″ wheel which is very sensible. It means that the original tyres can be swapped onto them if they are in good condition and is the most cost effective solution. The only real advantage of going for something bigger is that you get a slightly more impressive appearance, but the ride will be firmed up as you need to use a lower profile tyre to compensate for the increase in wheel size. If you didn’t compensate in this way then the vehicle speedo will become inaccurate and you may get issues with the tyre catching on the bodywork.
The Technical Part
You should be able to buy motorhome wheels without worrying about technical info but if you need to know then this is what you should be looking for:
- As already mentioned the pcd, or stud pattern should be 5×118
- The back of the wheel need to have a centre bore of 71.1mm (ideally directly drilled without the need for spigot/centralising rings)
- Offset (refers to wheel positioning/how close to bodywork it sits) – this needs to have a value of around 50. You may find this figure stamped on your current wheel, don’t worry if it doesn’t match exactly as the vehicle has a certain amount of tolerance.
- Width – wants to between 6″ and 7″
In terms of getting these fitted, most aftermarket motorhome wheels will be supplied with new bolts (you may need to buy a new wheel brace as the bolt head size may have to be reduced). When being fitted to a camper then you should be using high-pressure valves, either add these onto your purchase or make sure your fitter has them available. Locking wheel bolts are also a consideration and are supplied by all good wheel suppliers.
Finally, there seems to be a belief that swapping onto alloy wheels will offer a dramatic weight saving, freeing up some load capacity for a few more cases of French plonk! Unfortunately, this is not really the case (not another wine reference), campervan alloys are of a similar weight to a steel wheel, due to the amount of aluminium required to get to such a load capacity.
I think that covers it? Happy shopping & happy camping!