Below is a summary of Tyremen trading terms and conditions.
Important Fitting Information...
By purchasing alloy wheels and/or tyres from Tyremen you are fully responsible for the fitting and installation of these alloy wheels and/or tyres correctly. Tyremen Ltd does not take any responsibility for incorrectly fitted alloy wheels or tyres, and as such are not liable for any claims. We highly recommend that in order to ensure the safe use of your alloy wheels and tyres that you follow our Alloy Wheel Installation Check List Below:
If For Any Reason You Are Unsure Please Contact Us.
Before fitting tyres on all aftermarket wheels you MUST check...
- The stud/bolt hole pattern is correct
- That the alloy wheel fits freely on to the hub without interference, and that there are no screws, rivets or retaining clips which may interfere with a firm flat location of the hub against the wheel mounting face.
- That the alloy wheel rotates freely and truly on both front and rear hubs.
- When fastened to the hub, that no part of the wheel can make contact with the brake drums or callipers; or any other part of the steering or suspension.
Check Nuts/Bolts: Correct fitting is vital BE SURE..
- That the thread form is correct (fits nuts without alloy wheels).
- That the nut/bolt location seating is correct
- That the stud length is adequate for minimum thread penetration of approximately 1 x stud diameter and not too long as to permit bottoming of the stud in the nut or that the thread penetration of the bolt protrudes through the hub housing to cause damage to internal brake or hub components.
- That the threads are rust free, and not over lubricated
- When sleeve nuts are used, that the shank diameter is correct and that the bearing washers are always used.
When Fitting the Tyre Make Sure:
- That the alloy wheel rim size is compatible with tyre size
- Be Wary of scratching the protective lacquer coating. (On aluminium wheels and some chrome wheels) Aluminium corrodes very easily once exposed to atmosphere, water, road salt or corrosive acid based alloy wheel cleaners and chemicals.
- Where possible always use the adhesive type of balance weight, as these help to avoid scratching of the alloy wheel finish.
Finally Check:
- That the alloy wheel and tyre assembly does not contact any part of the suspension, body work or internal hub components (brakes, sensors etc) by carrying out full bump and lock to lock tests as well as a full visual inspection of the back / hub section of the alloy wheel fixing assembly before driving away from the fitting bay.
- Do not take risks - Wheel Security is vital check with us if you have any doubts.
- We would also recommend that after a period of around 20miles that you check your wheels to ensure security as some alloy wheels may need time to bed in correctly.
Returns & Refunds...
We want you to be totally satisfied with every purchase you make from Tyremen. If for any reason, you are not completely happy with your purchase, simply return it to Tyremen within 7 days of delivery, unused and in its original packaging, together with the receipt. We will then exchange your purchase or offer you a full refund minus any carriage costs we have incurred. We cannot accept any wheels back if they are damaged or scratched. All CMS products are guaranteed against manufacturing defects for a minimum of 1 year for painted wheels and 6 months for diamond cut or polished wheels.
Tyre Warranty
Tyre manufacturers must establish liability when a tyre is returned as faulty. In order for Tyremen to receive a refund we must send the tyre back to the manufacturer for inspection. If the tyre is found to be faulty then a credit will be raised which will be reduced according to remaining tread depth. We would ask customers to understand the need for proper tyre examination by the manufacturer before establishing liability to replace the tyre. It is not therefore possible to resolve new tyre problems on the spot.
Distance Selling Regulations...
Under theDistance Selling Regulations you have a right to cancel your order for any item purchased on this website for a full refund.
To cancel, you can email us or write to us within seven days of delivery of your item(s), quoting your order number. You must take reasonable care of the item(s) and must not use them. Item(s) may be returned to Tyremen, or we can arrange collection. If you have an Internet order query, please contact Tyremen Direct on 01482 505526, or email us via our contact us page.
Documents...
Permission to use documents (such as white papers, press releases and other publications) from this server ("Server") is granted by Tyremen, provided that:
- the below copyright notice appears in all copies and are both the copyright notice and this permission notice appear, use of such Documents from this Server is for informational and non-commercial or personal use only and will not be copied or posted on any network computer or broadcast in any media, and no modifications to any of the Documents are made. Use for any unauthorised purpose is expressly prohibited by law, and may result in severs civil or criminal penalties. Violators will be prosecuted to the maximum extent possible.
- Documents specified above do not include the design and layout of this website. Elements of this website are protected by trade dress and other laws and may not be copied or imitated in whole or in part. No logo, graphic, sound or image from this website may be copied or retransmitted without express permission from Tyremen.
Tyremen and/or its respective suppliers make no representations about the suitability of the information contained in the documents or related graphics and/or software published and this Server for any purpose. All such documents and related graphics are provided "as is" without warranty of any kind and are subject to change without notice. The entire risk arising out of their use remains with the recipient. In no event shall Tyremen and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption or loss of business information), even if Tyremen has been advised of the possibilities of such damages.
The name of Tyremen, or the Tyremen logo may not be used in advertising or publicity pertaining to distribution of this information without specific, written prior permission. Tyremen makes no representations about the suitability of this information for any purpose. It is provided "as is" without express or implied warranty. Photographs and graphics are representative of actual products but may not be the exact producer described or the exact configuration described.
Software...
Any software ("Software") that is made available for download from the server ("Server") is the copyright work of Tyremen and/or its suppliers. Use of this software is governed by the terms of the end user licence agreement, if any, which accompanies or is included with the Software ("LIcence Agreement"). An end user will be unable to install and Software that is accompanied by or includes a Licence Agreement unless he or she first agrees to the LIcence Agreement terms.
The software is made available for downloading solely for use by end users according to the LIcence Agreement. Any reproduction or redistribution of the Software not in accordance with the LIcence Agreement is expressly prohibited by law, and may result in severe civil or criminal penalties. Violators will be prosecuted to the maximum extent possible.
Trademarks...
Tyremen and the Tyremen logo are either trademarks and/or service marks or registered trademarks of Tyremen Limited.
Links to third party websites...
Linked websites are not under the control of Tyremen and Tyremen is not responsible for the content of any such linked websites. Tyremen provides to you only a as convenience, and the inclusion of any link does not imply endorsement by Tyremen.
Jurisdiction...
This website is hosted in the United Kingdom, Use of this website is subject to English law and jurisdiction.